2026 national planning guide
How much does gutter installation cost?
Published estimates disagree because they measure different project scopes. This guide shows the ranges side by side, lets you test linear footage, and explains what a real quote must include.
- Angi July 2026 project range
- $629–$1,735
- Broad per-foot range
- $4–$40
Planning worksheet
Estimate a published material range
Enter approximate gutter length and material. The result applies Angi's July 2026 national per-foot ranges; it is not a contractor quote.
Published range for 150 ft
$450–$2,250
Baseline: $3–$15 per linear foot for aluminum. Height, roof complexity, removal, downspouts, guards, fascia work, labor, and location can change the final price.
Get a property quote · 1-855-930-4195Why estimates differ
Compare the source before comparing the number
Angi's July 2026 guide reports a $629–$1,735 project range and $4–$40 per linear foot. This Old House's June 2026 research reports $12–$62 per foot and explicitly includes a wider labor-and-material scope. Neither number replaces an itemized local estimate.
| Source | Published range | How to use it |
|---|---|---|
| Angi, July 2026 | $4–$40/ft; $629–$1,735/project | Broad consumer planning range by size, type, and material. |
| This Old House, June 2026 | $12–$62/ft | A higher all-in research range illustrating how methodology changes the result. |
| HomeAdvisor, June 2026 | $194–$640 repair range | A repair benchmark, useful when comparing a localized fix with replacement. |
Material planning ranges
These are Angi's published 2026 per-foot material ranges. Gauge, profile, seamless fabrication, finish, downspouts, labor, and market conditions still change the quote.
| Material | Published range | Scope question |
|---|---|---|
| Aluminum | $3–$15/ft | Common, light, rust-resistant; price varies by gauge and configuration. |
| Vinyl | $3–$7/ft | Lower published range; temperature exposure and sectional joints matter. |
| Galvanized steel | $5–$20/ft | Stronger and heavier; labor and corrosion protection affect scope. |
| Copper | $15–$40/ft | Premium material with specialized fabrication and installation. |
| Zinc | $15–$30/ft | Premium material that forms a protective patina. |
Conversion checklist
Ask for one complete scope
A low headline price is not comparable if downspouts, removal, disposal, fascia repairs, or access costs appear later.
- Measured gutter linear footage
- Downspout count, size, and length
- Material, gauge, color, and profile
- Five-inch versus six-inch capacity
- Hanger type and spacing
- Removal and disposal
- Fascia or soffit repair allowances
- Splash blocks or drainage connections
- Warranty terms and exclusions
- Permit, tax, cleanup, and schedule
Repair or replace?
| Observed condition | Repair may fit when | Replacement may fit when |
|---|---|---|
| One leaking seam | The surrounding run is sound and correctly pitched. | Leaks recur across several seams or long runs. |
| Localized sagging | A few hangers failed and the fascia remains sound. | The run is deformed, undersized, or the fascia is widely damaged. |
| Storm or hail damage | Damage is limited to a replaceable section or downspout. | Multiple runs are dented, split, detached, or no longer drain correctly. |
| Overflow during rain | A clog or isolated outlet problem is confirmed. | The clean system lacks capacity, pitch, or adequate outlets. |
| Surface corrosion | It is cosmetic and metal remains structurally sound. | Rust-through, pinholes, and widespread joint failure are present. |
Gutter cost questions
How much does gutter installation cost per linear foot in 2026?
Angi reports a broad national range of $4 to $40 per linear foot, while its material table ranges from $3 per foot for some aluminum or vinyl projects to $40 per foot for copper. This Old House publishes a higher all-in research range of $12 to $62 per foot. Scope and methodology differ, so use these figures for planning and obtain a property-specific quote.
What information makes a gutter quote more accurate?
Provide approximate linear footage, number of stories, gutter material, gutter size, roofline complexity, downspout count, removal needs, visible fascia damage, and whether guards or underground drainage connections are involved.
Is repairing gutters cheaper than replacing them?
Often, but it depends on how localized the problem is. HomeAdvisor reports a national gutter-repair average of $398 and an average range of $194 to $640. Repeated failures, widespread corrosion, damaged fascia, or a system that is incorrectly sized can make replacement the better long-term scope.
Is the calculator a contractor quote?
No. It multiplies user-entered length by a published national material range. It does not price local labor, access, removal, downspouts, fascia repair, permits, taxes, or site-specific complexity.
Ready for a property-specific quote?
Bring the checklist and compare itemized scope—not only the total. On Scene Gutters connects callers with gutter contractors across the United States.
Editorial note: pricing was checked July 31, 2026. Published cost guides use different samples and inclusions. The figures above are planning references, not offers or guarantees.